PLC Department Automation

SIMODRIVE 611 DIGITAL CONTROL LOOP BLOCK HIGH PERFORMANCE 2 AXES SIN/COS 1 VPP DIRECT MEASURING SYSTEM NC SOFTWARE, REQUIRED FROM 06.04.09

SIMODRIVE 611 DIGITAL HIGH PERFORMANCE, DIRECT MEAS. SYSTEM 2 AXES CLOSED-LOOP CONTROL PLUG-IN NC SOFTWARE, REQUIRED FROM 06.04.09

SIMODRIVE 611-D CLOSED-LOOP PLUG-IN CONTROL UNIT,1 AXIS, FOR DIGITAL FEED DRIVES, W/O DIRECT MEASURING SYSTEM

SIMODRIVE 611 Pulsed resistor module, internal resistor for 0.3/25 kW universal enclosure for 211/288 mm depth

SIMODRIVE 611 POWER MODULE, 2 AXES, 50A, INTERNAL HEAT DISSIPATION, RATED MOTOR CURRENTS: FEED = 18 A MAIN SPINDEL = 24 A

SINUMERIK OPER. PANEL FRONT 15.1" TFT, 416 MM WIDTH, WITH MECHANICAL KEYS FOR DISTRIBUTED I/O UP TO 10 M

SINUMERIK OPERATOR PANEL FRONT TP 015A, 15" TFT (1024 X 768) WITH MEMBRANE KEYS AND TOUCH

SINUMERIK operator panel front OP 015A, 15" TFT (1024x 768) with membrane keys and mouse

SINUMERIK FULL CNC KEYBOARD OP 032S, QWERTY DESIGN AT, WITH 1.5 M CABLE, STANDARD/US LAYOUT, WIDTH 310; FOR MMC 100.2/101/102/103 AND PCU 20/50/70

SIMODRIVE 611 BUILT-ON FAN FOR 300 MM MODULES INT./EXT. COOLING UL DESIGN, NOT FOR: 6SN1123-1AA01-0FA0, -0FA1 AND 6SN1145-1BA01-0DA0, -0DA1

SIMODRIVE 611-D DRIVE BUS CABLE FOR MODULE WIDTH = 100 MM

SINUMERIK 840DE CNC-SOFTWARE 6-5 FOR NCU 571.2/571.3 ON PC CARD SW VERSION 5.3; SINGLE LICENSE

SIMODRIVE 611 Infeed/regenerative feedback module, 36/47 KW Controlled; Internal heat dissipation Line contactor with NC contact

SIMODRIVE 611-A Feed module, 12.5/25 A, comfort interface

SIMODRIVE 611 POWER MODULE, 1 AXIS, 80 A, EXTERNAL COOLING, MOTOR RATED CURRENT: 1FT5 = 40 A, 1FT6 = 28 A, 1PH = 30 A,INDUCT. MOTOR= 30 A

SIMODRIVE 611 Power module, 2-axis, 50 A, Internal heat dissipation Rated motor currents: 1FT5 = 25 A, 1FT6 = 18 A,

SIMODRIVE 611 Power module, 2-axis, 25 A, Internal heat dissipation Rated motor currents: Feedrate = 9 A Main spindle= 8 A

SIMODRIVE 611 POWER MODULE, 1 AXIS, 200A INTERNAL COOLING, MOTOR RATED CURRENTS: FEED = 70 A MAIN SPINDEL = 85 A

SIMODRIVE 611-A/D, power module, 1-axis, 120 A, internal heat dissipation, Rated motor currents: 1PH = 45 A, asynchronous = 45 A

SIMODRIVE 611 POWER MODULE, 1 AXIS, 160 A, INTERNAL COOLING, MOTOR RATED CURRENTS: 1FT5 = 80 A, 1FT6 = 56 A, 1PH = 60 A, INDUCTION MOTOR = 60 A

SIMODRIVE 611 Power module, 1-axis, 160 A, Internal heat dissipation Rated motor currents: 1FT5 = 80 A, 1FT6 = 56 A, 1PH = 60 A, asynchronous = 60 A

SIMODRIVE 611 POWER MODULE, 1 AXIS, 80 A, INTERNAL COOLING, MOTOR RATED CURRENT: 1FT5 = 40 A, 1FT6 = 28 A, 1PH = 30 A, INDUCTION MOTOR = 30 A

SIMODRIVE 611 Power module, 1-axis, 25 A, Internal heat dissipation Rated motor currents: 1FT5 = 12.5 A, 1FT6 = 9 A, asynchronous = 8 A

SIMODRIVE 611-A Control Unit for asynchronous motor drive, analog interface, motor potentiometer

SIMODRIVE 611 universal Digital Control Unit, 2 axes, connection opt. encoder Positioning or position setpoint interface F motors 1FT6, 1FK6, 1FE1,...

SIMODRIVE 611 UNIVERSAL DIGITAL CLOSED-LOOP CONTROL PLUG-IN UNIT, 2 AXES, RESOLVER, ANALOG SET VALUE INTERFACE, CLOSED-LOOP SPEED CONTROL FOR 1FT6,...

SIMODRIVE 611 U HR 1-axis Control Unit Resolver Speed/torque setpoint Expandable by options

SIMODRIVE 611 UNIVERSAL DIGITAL PLUG-IN CLOSED-LOOP CONTROL UNIT, 2 AXES, OPTICAL ENCODER, SPEED CONTROL, ANALOG SET VALUE INTERFACE FOR 1FT6,1FK6,...

SIMODRIVE 611-D CLOSED-LOOP PLUG-IN CONTROL UNIT, 2 AXES, FOR DIGITAL DRIVE FEED DRIVE+MAIN SPINDLE DRIVE W/O DIRECT MEASURING SYSTEM, STANDARD CLO...

SIMODRIVE 611 digital High Performance. 1-axis Control Unit. NC software Required as of 06.04.09!

SIMODRIVE 611 POWER MODULE, 1 AXIS, 25 A, INTERNAL COOLING, MOTOR RATED CURRENT: FEED = 9 A MAIN SPINDEL = 8 A

SIMODRIVE 611-D Control Unit 2-axis for digital drive FDD, dir. measuring system, volt. signals performance control

SINUMERIK DISKETTE UNIT 3.5" WITH CABLE L = 0.5 M

SINUMERIK PERIPHERIE ANALOG DRIVE INTERFACE (ADI4) FOR 4 AXES OVER PROFIBUS DP WITH MOTION CONTROL FUNCTIONALITY FIRMWARE 01.04.08

SINUMERIK PCU 50 1.2 GHz, 512 MB RAM, 24 V DC; Windows XP Professional for embedded systems (Windows XP Pro EmbSys).

SINUMERIK PCU 50 566 MHZ, 256 MB RAM; 24 V DC; WINDOWS XP PROFESSIONAL FOR EMBEDDED SYSTEMS (WINXP PRO EMBSYS)

SINUMERIK PCU 50 PENTIUM II/333 MHZ/128 MB 24 V DC, WITH WINDOWS NT4.0 AND CURRENT HMI ADVANCED SOFTWARE (OP.SYS.: SINUMERIK 840D BS003)

SINUMERIK FM-NC/810D/DE/840D/DE MMC103 WITH SYSTEM SOFTWARE SW 3.X (UNDER WIN 3.11) PENTIUM 133 MHZ, 16 MB D-RAM DISPLAY: GERMAN/ENGLISH (BESY: SIN...

SINUMERIK MACHINE CONTROL PANEL MCP 483, MPI/PROFIBUS-DP, WIDTH 19", MEMBRANE KEYS, 22 MM EMERGENCY OFF

6FC5248-0AF00-0AA0 SINUMERIK OPERATOR PANEL FRONT WITHOUT LCD UNIT FOR SINUMERIK OP 010 6FC5203-0AF00-0AA1 6FC5203-0AF00-0AA0

SINUMERIK FM-NC/810D/DE/840D/DE CNC FULL KEYBOARD IN QWERTY DESIGN, WITH 1.5 M CABLE STANDARD/US LAYOUT XT/AT COMPATIBLE (SELECTABLE) WIDTH 19"

SINUMERIK 840C / 840CE MMC CPU 486DX2 66 MHZ 16MB RAM FOR VERSION P AND HIGHER FOLL. UNITS ARE REQUIRED: CENTRAL CONTROLLER W. DAMPERS (6FC5148-0AA...

SINUMERIK OPERATOR PANEL FRONT WITHOUT LCD-UNIT, with touchpad FOR SINUMERIK OP 012 6FC5203-0AF02-0AA2

SIMODRIVE 611-D Control Unit 2-axis for digital drive FDD, dir. measuring system, current signals performance control

SIMODRIVE 611-D Control Unit 2-axis for digital drive dir. measuring system, volt. signals

SINUMERIK 840DE CNC-SOFTWARE 6-5 FOR NCU 571.2/571.3 ON PC CARD SW VERS. 4.4, SINGLE LICENSE

SINUMERIK PCU 50 1.2 GHZ; 256 MB RAM; 24 V DC; WINDOWS NT WORKSTATION V4.0 FOR EMBEDDED SYSTEMS (WINNT4.0 WS EMBSYS)