PLC Department Automation

SINUMERIK PCU 50 1.2 GHZ; 256 MB RAM; 24 V DC; WINDOWS NT WORKSTATION V4.0 FOR EMBEDDED SYSTEMS (WINNT4.0 WS EMBSYS)

SINUMERIK PCU 50 566 MHZ, 128 MB RAM; 24 V DC; WINDOWS NT WORKSTATION V4.0 FOR EMBEDDED SYSTEMS (WINNT4.0 WS EMBSYS)

SINUMERIK PCU 50 PENTIUM II/333 MHZ/128 MB 24 V DC, WITH WINDOWS NT4.0 (OP.SYS.: SINUMERIK 840D BS003)

SINUMERIK FM-NC/810D/DE/840D/DE MMC103 WITH SYSTEM SOFTWARE SW 3.7/4.4/5.3 (WFW3.11/WIN95) PENTIUM 133 MHZ, 32 MB D-RAM LANG.: GER, EN, FR, IT, SP ...

SINUMERIK FM-NC/810D/DE/840D/DE PUSHBUTTON PANEL PP 031-MC/HR/S CUSTOMER-SPECIFIC VERSION BASED ON 6FC5203-0AD25-0AA0 1-CHANNEL ACKNOWLEDGEMENT SUI...

SINUMERIK 840C/ 840CE CENTRAL SERVICE BOARD W. CENTRAL BACK-UP BATTERY AND CONNECTION OF 2 HANDWHEELS AND 2 PROBES

SINUMERIK 840C/840CE NC CPU 486DX VB, 8 MB RAM

SIMODRIVE 611 UNIVERSAL EMPTY HOUSING 50 MM WIDE

SIMODRIVE 611 Power module, 2-axis, 8 A, Internal heat dissipation Rated motor currents: Feedrate = 3 A Main spindle= 3 A

SIMODRIVE 611 Power module, 1-axis, 8 A, Internal heat dissipation Rated motor currents: 1FT5 = 4 A, 1FT6 = 3 A

SIMODRIVE 611 Power module, 1-axis, 80 A, Internal heat dissipation Rated motor currents: 1FT5 = 40 A, 1FT6 = 28 A, 1PH = 30 A, asynchronous = 30 A

SIMODRIVE 611 DIGITAL HIGH STANDARD, DIRECT MEAS. SYSTEM 2 AXES CLOSED-LOOP CONTROL PLUG-IN NC SOFTWARE, REQUIRED FROM 06.04.09

SIMODRIVE 611-D CLOSED-LOOP CONTROL PLUG-IN UNIT, 2 AXES, STANDARD CLOSED- LOOP CONTROL 2, WITH DIRECT MEASURING SYSTEM SPG-S, MAX. 2 AXES FDD OR ...

SIMODRIVE 611-D Control Unit 1-axis for digital drive, FS + RS, dir. measuring system, current signals performance control

SIMODRIVE 611-D Control Unit 1-axis for digital drive, FS + RS, dir. measuring system, volt. signals

SIMODRIVE 611-D Control Unit 1-axis for digital drive, FS + RS, without direct measuring system

SIMODRIVE 611-A Control Unit 1-axis for feed drives with 1FT5, standard interface

SIMODRIVE 611-A Control Unit 1-axis for feed drives with 1FT5, comfort interface

SIMODRIVE 611 MAINS FILTER FOR STABIL. SUPPLY 36 KW, SINUS + BLOCK-TYPE CURRENT MODE

SIMODRIVE 611 UNIVERSAL OPT. PLUG-IN UNIT PROFIBUS DP, PROFIBUS UNIT DP-NORM-SLAVE FOR CYCLIC AND ACYCLIC DATA EXCHANGE

SIMODRIVE 611 MAINS FILTER FOR STABIL. SUPPLY 16 KW, SINUS + BLOCK-TYPE CURRENT MODE

SIMODRIVE 611 MAINS FILTER FOR UNREGULATED POWER SUPPLY 10 KW

SINUMERIK 840DE EXPORT CNC-SOFTWARE NCU 572.2 ON PC CARD, SW VERSION 5.3 SINGLE LICENSE

SIMODRIVE 611 HF REACTOR 16 KW, UL

SINUMERIK 810D/810 DE BOX FOR ELECTRONIC CONTROL DEVICE CCU BOX EXT./INT. COOLING 2 INTEGR. POWER-CIRCUITS 2 X 9A/18A FOR FEED DRIVES

SINUMERIK 810D AXIS EXTENSION UNIT FOR COMPLETE EXPANSION, UP TO 5 DRIVES CAN BE CONNECTED TO 1 OR 2 AXES -611 POWER MODULES, WITH RIBBON CABLES

SINUMERIK 840D/DE NCU 573.2 PENTIUM II W/O SYSTEM SOFTWARE MEMORY: NC 2.5 MB, PLC 96 KB PROFIBUS-DP PREP.

SINUMERIK 840D/DE NCU 573.2 32MB D-RAM W/O SYSTEM SOFTWARE MEMORY: NC 1.5 MB, PLC 64 KB PREP. PROFIBUS-DP

SINUMERIK 840D/DE NCU 572.3, AMD K6-2 PROCESSOR W/O SYSTEM SOFTWARE MEMORY: NC 0.5 MB, PLC 96 KB PREP. FOR PROFIBUS-DP FITTING

SINUMERIK 840DE NCU 561.2 W/O SYSTEM SOFTWARE MEMORY: NC 0.5 MB, PLC 96 KB PREP. PROFIBUS-DP

SIMODRIVE 611 HF REACTOR, 16/21 KW FOR SINUSOIDAL AND BLOCK-TYPE CURRENT

SIMODRIVE 611-D CLOSED-LOOP CONTROL PLUG-IN UNIT, 2 AXES, STANDARD CLOSED- LOOP CONTROL 2, W/O DIRECT MEASURING SYSTEM, MAX. 2 AXES FDD OR 1 AXIS MSD

SIMODRIVE 611 DIGITAL HIGH PERFORMANCE, 2 AXES CLOSED-LOOP CONTROL PLUG-IN NC SOFTWARE, REQUIRED FROM 06.04.09

SIMODRIVE 611 DIGITAL CONTROL LOOP BLOCK HIGH PERFORMANCE 2 AXES SIN/COS 1 VPP NC SOFTWARE, REQUIRED FROM 06.04.09

MOBY I communication module ASM454 can be used for operation of Components via PROFIBUS DP-V1 without file handler max. 4 Standard SLG 4x/SLG 7x co...

SINUMERIK 840C/840CE CENTRAL CONTROLLER 1, 12 SLOTS WITHOUT MODULES

SINUMERIK 840C/840CE MMC CPU 486DX4/100 MHZ WITH 8 MB RAM AND FLASHDRIVE

SIMODRIVE 611 DIGITAL CONTROL LOOP BLOCK HIGH PERFORMANCE 1 AXIS SIN/COS 1 VPP DIRECT MEASURING SYSTEM NC SOFTWARE, REQUIRED FROM 06.04.09

SIMODRIVE 611-D Control Unit 1-axis for digital drive, FS + RS, without direct measuring system, performance control

SIMODRIVE 611-A PLUG-IN CLOSED-LOOP CONTROL UNIT, 2-AXES, FOR FEED DRIVES WITH 1FT5, STANDARD INTERFACE

SIMODRIVE 611 SURGE ARRESTER FOR POWER SUPPLY 10 KW, FOR INTERNAL AND EXTERNAL COOLING

SINUMERIK 840DE NCU 571.4 WITHOUT SYSTEM SOFTWARE MEMORY: NC 0.5 MB, PLC 96 KB PREPARED FOR PROFIBUS DP

SINUMERIK 840DE NCU 571.3 WITHOUT SYSTEM SOFTWARE MEMORY: NC 0.5 MB, PLC 96 KB PREPARED FOR PROFIBUS-DP

SINUMERIK OPERATOR PANEL TCU (THIN CLIENT UNIT) FOR SINUMERIK/SIMOTION

SINUMERIK 840C/ 840CE MACHINE CONTROL PANEL T W/O KEYBOARD INTERFACE

SINUMERIK HARD DISK 10 GB WITH SUPPORTING SHEET STEEL AND DAMPER FOR PCU 50/70 WITH 333/500/566/1200 MHZ

SINUMERIK expansion panel 19" for MCP/MPP Mounting using tensioners Customer-specifically equipped based on 6FC5247-0AA43-1AA0

SINUMERIK 840D/DE NCU BOX FOR INSTALLATION OF NCU 561.2/561.3/561.4/ 571/571.2/571.3/571.4/ 572/572.2/572.3/573.4/ 573.2/573.3/573.4/573.5 WITH POW...