PLC Department Automation

SINUMERIK 810/820,BASIC VERS. 2 6FX1132-8BB01 CPU W. COPROCESSOR (COP)

ACTUATOR SENSOR INTERFACE F90 4I/40 APPLICATION MODULE, IP20 4X1 INPUT 200 MA, PNP 4X1 OUTPUT,ELECTRONICS DC 24V 2A,SCREW TERMINALS, EXT.VOLTAGE SU...

SITOP power 2.5 A, Univ. Line Stabilized power supply input: 120-230 V AC (DC 110-350 V) output: DC 24 V/2,5 A

Safety position switch with tumbler Locking force 1300 N 5 directions of approaches Spring-locked Auxiliary release with lock Magnet voltage 24 V D...

Momentary-contact foot switch, 2-pedal with cover, without latching, Metal enclosure IP65, 2 NC+2 NO Cable entry M25 x 1.5

Temperature monitoring relay PT100, Overshoot 2 threshold values, Width 22.5 mm -50 °C to 50 °C 24 - 240 V AC/DC 1 NO + 1 CO, Load and quiescent ...

SITOP PSE201U buffer module Buffer time 100 ms to 10 s Depending on load current

SIMATIC PM 1507 24 V/8 A STABILIZED POWER SUPPLY FOR SIMATIC S7-1500 INPUT: 120/230 V AC OUTPUT: 24 V/8 A DC

Motor starter SIRIUS 3RM1 Reversing starter SAFETY 500 V; 1.6-7.0 A; 110-230 V AC Push-in connection method

Motor starter SIRIUS 3RM1 Reversing starter SAFETY 500 V; 1.6-7.0 A; 110-230 V AC Screw connection system

Motor starter SIRIUS 3RM1 Reversing starter SAFETY 500 V; 1.6 - 7.0 A; 24 V DC Screw connection system

SIMATIC S5, Plug-in cable 734-2 Connecting cable for PG 7.. and S5-90U to S5-155U 5 m

Motor starter SIRIUS 3RM1 Reversing starter SAFETY 500 V; 0.1 - 0.5 A; 24 V DC Push-in connection method

Motor starter SIRIUS 3RM1 Reversing starter SAFETY 500 V; 0.1 - 0.5 A; 24 V DC Control circuit push-in Main circuit screw terminal

Motor starter SIRIUS 3RM1 Reversing starter SAFETY 500 V; 0.4 - 2.0 A; 24 V DC Screw connection system

Solid-state contactor 3-phase 3RF3 AC 53 / 3.8 A / 40 °C 48-480 V / 110-230 V AC Reversing circuit Instantaneous switching screw terminal

Safety position switch with tumbler Locking force 1300 N 5 directions of approaches Spring-locked Auxiliary release with lock Magnet voltage 24 V D...

Bus termination module for SINEC L2-RS 485 and PROFIBUS RS 485 for bus connection after the last device at the bus line Supply voltage: 24 V DC

Monitoring relay, can be mounted to Contactor 3RT2, Size S0 standard, digitally adjustable Apparant/active current monitoring 4...40 A, 20...400 Hz...

Monitoring relay, can be mounted to Contactor 3RT2, Size S0 standard, digitally adjustable Apparant/active current monitoring 4...40 A, 20...400 Hz...

Digital monitoring relay for 3-phase voltage with N-conductor Autom. phase sequence correction Phase failure 3 x 90 to 400 V 50 to 60 Hz AC Undervo...

12M BUS TERMINAL FOR PROFIBUS, TRANSMISSION RATE 9.6 KBIT/S TO 12 MBIT/S, CONNECTING CABLE 1.5 M

TERMINAL MODULE FOR ET 200S RS FOR REVERSING STARTER, WITH FEEDER CONNECTION

SIRIUS Compact load feeder DOL starter 690 V 110...240 V AC/DC 50...60 Hz 3...12 A IP20 Connection main circuit: screw terminal Connection auxiliar...

SIRIUS Compact load feeder DOL starter 690 V 24 V AC/DC 50...60 Hz 3...12 A IP20 Connection main circuit: Spring-type terminal Connection auxiliary...

Motor starter SIRIUS 3RM1 DOL starter SAFETY 500 V; 1.6 - 7.0 A; 24 V DC Control circuit push-in Main circuit screw terminal

Motor starter SIRIUS 3RM1 DOL starter SAFETY 500 V; 1.6 - 7.0 A; 24 V DC Screw connection system

Motor starter SIRIUS 3RM1 DOL starter SAFETY 500 V; 0.4 - 2.0 A; 24 V DC Screw connection system

Motor starter SIRIUS 3RM1 DOL starter SAFETY 500 V; 0.1 - 0.5 A; 24 V DC Screw connection system

Motor starter SIRIUS 3RM1 DOL starter SAFETY 500 V; 0.1-0.5 A; 110-230 V AC Screw connection system

Motor starter SIRIUS 3RM1 DOL starter SAFETY 500 V; 0.1-0.5 A; 110-230 V AC Push-in connection method

Motor starter SIRIUS 3RM1 DOL starter SAFETY 500 V; 0.4-2.0 A; 110-230 V AC Push-in connection method

Circuit breaker size S0 for transformer protection with approval circuit breaker UL 489, CSA C22.2 No.5-02 A-release 22 A N-release 364 A screw ter...

SIRIUS Compact load feeder DOL starter 690 V 110...240 V AC/DC 50...60 Hz 3...12 A IP20 Connection main circuit: plug-in, without terminals Connect...

Monitoring relay, can be mounted to Contactor 3RT2, Size S0 standard, digitally adjustable Apparant/active current monitoring 4...40 A, 20...400 Hz...

Digital monitoring relay 3-phase supply voltage Autom. phase sequence correction Phase failure 3 x 160 to 690 V 50 to 60 Hz AC Undervoltage and ove...