PLC Department Automation

SIMATIC S7-300, CP 341 Communications processor with RS232C interface (RS-232-C) incl. configuration package on CD

SIMATIC NET, CP 342-2 COMMUNICATIONS PROCESSOR FOR CONNECTION OF SIMATIC S7-300 TO AS-INTERFACE (W/O FRONT CONNECTOR)

SIMATIC S7-400, PS 405 POWER SUPPLY, WIDE RANGE 20A, 24/48/60V DC, 5V/20A DC

SIMATIC S7-400, Power supply PS407, 20 A,UC 120/230V,5 V DC/20 A

SIMATIC S7-400H, rack UR2-H, central and distributed with 2 x 9 slots

SIMATIC S7-1500, CM PTP RS422/485 HF Communication module for Serial connection RS422 and RS485, Freeport, 3964 (R), USS, MODBUS RTU Master, Slave,...

SIMATIC DP, INTERFACE MODULE IM152-1 FOR ET200ISP, FOR STANDARD AND REDUNDANT OPERATION

IWLAN client, SCALANCE W748-1 M12, 1 radio, 3 N-CON antenna port, iFeatures support via key plug, IEEE 802.11a/b/g/h/n, 2.4/5GHz, gross 450 Mbit/s ...

SIMODRIVE 611 POWER MODULE, 1 AXIS, 8 A, INTERNAL COOLING, MOTOR RATED CURRENT: 1FT5 = 4A, 1FT6 = 3A INDUCTION MOTOR = 3 A

SIMATIC S7-400, Power supply PS407; 10 A, wide range, UC 120/230V, 5 V DC/10 A, for redundant use

SIMATIC S7-400, rack UR1, central and distributed with 18 slots, 2 redundant PS can be plugged in

IWLAN Access Point, Scalance W774-1 RJ45, 1 radio, 2 R-SMA antenna connector, iFeatures support via KEY-PLUG, IEEE 802.11a/b/g/h/n, 2,4/5GHz, Brutt...

SIMATIC DP, BASIC MODULE BM142 FOR ET200X, 4DO 24V DC/2A 5-PIN M12, PROTECTION IP 66/67, INTEGR. PROFIBUS DP IF, 12 MBIT/S, INTEGR. PS INTERFACE

SIMODRIVE 611 DIGITAL HIGH PERFORMANCE, DIRECT MEAS. SYSTEM 1 AXIS CLOSED-LOOP CONTROL PLUG-IN NC SOFTWARE, REQUIRED FROM 06.04.09

SIMATIC S7-400, IM460-3 TRANSMITTER INTERFACE MODULE, FOR DISTRIBUTED CONNECTION UP TO 102 M, WITH K BUS

Scalance X204RNA EEC; REDUNDANT NETWORK ACCESS F. HSR NETWORKS; 2X 100MBIT/S RJ45 PORTS; 2 X 100MBIT/S COMBO-PORTS; LED-DIAGNOSTICS; FAULT SIGNAL C...

Simatic S7-400, POWER SUPPLY PS 405: 10A, WIDE RANGE, 24/48/60V DC, DC, 5V DC/10A, FOR REDUNDANT USE ATEX APPROBATIONIDENTIFICATION

SIMATIC STEP 7 Prof. V15 Upgrade V11..V14-> V15 or V11/2010..V14/2017 -> V15/2017 or 2006..2010 -> V15/2017 Combo floating license; Engine...

SINUMERIK FM-NC/810D/DE/840D/DE SLIMLINE OPERATOR PANEL OP 031 19" OP W. 24 CM/9.5" MONOCHROME FLATSCREEN, STANDARD LAYOUT

SIMATIC S7-400, PS 407 POWER SUPPLY, 4A, 120/230V AC, 5V/4A DC

Sinamics S120 CONVERTER POWER Module PM340 INPUT 3AC 380-480V, 50 60HZ OUTPUT 3AC 5,9A (2,2KW) FRAME SIZE BLOCKSIZE SIZE FSB INTERNAL AIR COOLING

TRANSFORMER SITAS; PHASES:1; PN/PN(S6)(KVA):2 /9,7; UPRI(V):550-525-500-480-460- 440-415-400-380-230-208; USEC(V):2X115; ISEC(A):2X8,7; F(HZ):50......

circuit breaker VL250N standard breaking capacity Icu=55kA, 415V AC 3-pole, motor/generator prot. Electronic Trip Unit ETU10M, LI In=200A, rated cu...

Communication module LOGO! communication module EIB as interface between EIB and LOGO! PS 24 V DC/AC Image via bus v. max.: 16 DI, 12 DO, 8 AI and ...

SIMOVERT Master drives Control and Control module CU1 Software Version 1.1

SIMATIC S7-400, Power supply PS407;10A,UC 120/230V,5 V DC/10 A for redundant use

CLASS B FOOTPRINT FILTER SUITABLE FOR UNITS MM37/3 MMV37/3 MM55/3 MMV55/3 MM75/375 MMV75/3 MM110/3 MMV110/3 MM150/3 MMV150/3

Sinamics G120C RATED POWER 2,2KW with 150% OVERLOAD FOR 3 SEC 3AC380-480V +10/-20% 47-63HZ Integrated FILTER Class A I/O-INTERFACE: 6DI, 2DO,1AI,1A...

Communications processor CP 342-5 for connection of SIMATIC S7-300 to PROFIBUS DP, S5-compatible, PG/OP and S7 communication

Simatic DP, DISTRIBUTED I/O PN/PN COUPLER COUPLING Module FOR CONNECTING TWO PROFINET NETWORKS TRANSFER OF PROFISAFE DATA REDUNDANT POWERSUPPLY

SINAMICS S210 Input voltage: 3AC 200-480V -10%/+10% 2.9A 45-66Hz Output voltage: 0-Input V 2.3A 0-550Hz Motor: 0.75kW Protection: IP20 Frame Size A...

SINAMICS S210 Input voltage: 200-240 V 1AC; -10%/+10%; 9.3 A; 45-66 Hz; Output voltage: 0-input V; 4.4 A; 0-550 Hz; Motor: 0.75 kW; Degree of prote...

MICROMASTER 420 UNFILTERED 1/3AC 200-240V +10/-10% 47-63HZ CONSTANT TORQUE POWER 2.2 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 2.2 KW 202 X 14...

SIMATIC S7, RS485 REPEATER FOR THE CONNECTION OF PROFIBUS/MPI BUS SYSTEMS WITH MAX. 31 NODES; MAX. 12 MBIT/S, IP20

SIMATIC NET, CP 443-5 BASIC COMMUNICATIONS PROCESSOR FOR CONNECTING SIMATIC S7-400 TO PROFIBUS, FMS, S5-COMPATIBLE PG/OP AND S7 COMMUNICATION

SIMATIC S7, RAM Memory Card for S7-400, long design, 2 Mbyte