PLC Department Automation

SIMATIC DP, POWER MODULE PM-E FOR ET 200S; 24V DC WITH DIAGNOSIS

SIMATIC DP, RS485 terminating resistor for terminating PROFIBUS/MPI networks

SIMATIC MM memory card 128 MB multi media card for OP 77B, TP/OP 177B, TP/OP 277, C7-635, MP 177, MP 277, MP 377, Mobile Panel 177, Mobile Panel 27...

Front connector for SIMATIC S7-300, 20pole (6ES7392-1AJ00-0AA0) with 20 single cores 0.5 mm2, H05V-K single cores, screw-type version pack. unit = ...

Sinamics LINE REACTOR 380-480V 3AC 47-63HZ I_LN = 11,3A STANDALONE

SIMATIC DP, TERMINAL BLOCK TB1-4/DC (ET 200B) FOR DIGITAL ELECTR. SUBMODULES WITH 4-WIRE SCREW TERMINALS, W=160MM

SIMATIC ET 200SP, Relay module, RQ NO 4x 120V DC..230VAC/5A ST. 4 normally open contacts, isolated contacts, packing unit: 1 piece, fits to BU-type...

Sinamics BRAKE RELAY FOR POWER MODULE

BACKPLANE BUS Module 155MM FOR ET 200PRO FREQ. CONVERTER

SIMATIC S7, memory card for S7-1x 00 CPU/SINAMICS, 3, 3 V flash, 4 MB

SIMATIC ET 200SP, Digital output module, DQ 8x 24V DC/0,5A Basic, Source output (PNP,P-switching) Packing unit: 1 piece, fits to BU-type A0, Colour...

SIPLUS ET 200SP BU15-P16+A0+2D -40... +70 °C WITH CONFORMAL COATING BASED ON 6ES7193-6BP00-0DA0 . PUSH-IN TERMINALS, W/O AUX-TERMINALS, NEW LOADGR...

SIMATIC S7-1200, BATTERY BOARD BB 1297 FOR LONG-TERM BACKUP OF THE REALTIME CLOCK; PLUGGABLE IN THE SIGNAL BOARD S7-12XX CPU (FW3.0 AND LATER); BAT...

SIMATIC S7-1200, EXPANSION CABLE TWO-ROW ARRANGEMENT FOR SM 12XX, 2.0 M

SIMATIC DP, Connection plug for PROFIBUS up to 12 Mbit/s 35 degree cable outlet, Insulation displacement method FastConnect, With PG receptacle 15....

SIMATIC DP,BUS CONNECTOR FOR PROFIBUS UP TO 12 MBIT/S 90 DEGREE ANGLE CABLE OUTLET, IPCD TECHOLOGY FAST CONNECT, WITH PG SOCKET 15,8 X 59 X 35,6 MM...

SIMATIC S7-400, FRONTAL CONNECTOR FOR SIGNAL MODULES WITH SPRING CONTACT, 48-POLE

SIMATIC DP, Connection plug for PROFIBUS up to 12 Mbit/s 90 ° cable outlet, Insulation displacement method FastConnect, without PG socket 15.8x 59x...

SIMATIC S7-1500, Front connector in push-in design, 40-pole for 25 mm wide modules and compact CPUs of the S7-1500, incl. cable tie

Sinamics G120 Basic OPERATOR Panel (BOP-2)

SIMODRIVE 611 Power module, 2-axis, 50 A, Internal heat dissipation Rated motor currents: 1FT5 = 25 A, 1FT6 = 18 A,

SIMODRIVE 611-A/611-D Infeed/regenerative feedback module, 16/21 kW Controlled

SIMODRIVE 611 universal HR 2-axis Control Unit Incremental encoder sin/cos 1 Vpp Absolute encoder EnDat Velocity/speed torque setpoint expandable b...

SIMODRIVE 611 DIGITAL CONTROL LOOP BLOCK HIGH PERFORMANCE 2 AXES SIN/COS 1 VPP DIRECT MEASURING SYSTEM NC SOFTWARE, REQUIRED FROM 06.04.09

SIMODRIVE 611 DIGITAL HIGH PERFORMANCE, DIRECT MEAS. SYSTEM 2 AXES CLOSED-LOOP CONTROL PLUG-IN NC SOFTWARE, REQUIRED FROM 06.04.09

SIMODRIVE 611-D CLOSED-LOOP PLUG-IN CONTROL UNIT,1 AXIS, FOR DIGITAL FEED DRIVES, W/O DIRECT MEASURING SYSTEM

SIMODRIVE 611 Pulsed resistor module, internal resistor for 0.3/25 kW universal enclosure for 211/288 mm depth

SIMODRIVE 611 POWER MODULE, 2 AXES, 50A, INTERNAL HEAT DISSIPATION, RATED MOTOR CURRENTS: FEED = 18 A MAIN SPINDEL = 24 A

SINUMERIK OPER. PANEL FRONT 15.1" TFT, 416 MM WIDTH, WITH MECHANICAL KEYS FOR DISTRIBUTED I/O UP TO 10 M

SINUMERIK OPERATOR PANEL FRONT TP 015A, 15" TFT (1024 X 768) WITH MEMBRANE KEYS AND TOUCH

SINUMERIK operator panel front OP 015A, 15" TFT (1024x 768) with membrane keys and mouse

SINUMERIK FULL CNC KEYBOARD OP 032S, QWERTY DESIGN AT, WITH 1.5 M CABLE, STANDARD/US LAYOUT, WIDTH 310; FOR MMC 100.2/101/102/103 AND PCU 20/50/70

SIMODRIVE 611 BUILT-ON FAN FOR 300 MM MODULES INT./EXT. COOLING UL DESIGN, NOT FOR: 6SN1123-1AA01-0FA0, -0FA1 AND 6SN1145-1BA01-0DA0, -0DA1

SIMODRIVE 611-D DRIVE BUS CABLE FOR MODULE WIDTH = 100 MM

SINUMERIK 840DE CNC-SOFTWARE 6-5 FOR NCU 571.2/571.3 ON PC CARD SW VERSION 5.3; SINGLE LICENSE

SIMODRIVE 611 Infeed/regenerative feedback module, 36/47 KW Controlled; Internal heat dissipation Line contactor with NC contact