Siemens

SINUMERIK 840D SL CNC-HARDWARE NCU 730.2 PN WITH PLC 319-3PN/DP USER MEMORY: CNC: 3MB; PLC: 512KB INTERNAL-HEAT-DISSIPATION

SINUMERIK 840D/DE NCU 573.2 PENTIUM II W/O SYSTEM SOFTWARE MEMORY: NC 2.5 MB, PLC 96 KB PROFIBUS-DP PREP.

SINUMERIK 840D/DE NCU 573.2 32MB D-RAM W/O SYSTEM SOFTWARE MEMORY: NC 1.5 MB, PLC 64 KB PREP. PROFIBUS-DP

SINUMERIK 840D/DE NCU 572.3, AMD K6-2 PROCESSOR W/O SYSTEM SOFTWARE MEMORY: NC 0.5 MB, PLC 96 KB PREP. FOR PROFIBUS-DP FITTING

SINUMERIK 840DE NCU 561.2 W/O SYSTEM SOFTWARE MEMORY: NC 0.5 MB, PLC 96 KB PREP. PROFIBUS-DP

SIMODRIVE 611 HF REACTOR, 16/21 KW FOR SINUSOIDAL AND BLOCK-TYPE CURRENT

SIMODRIVE 611-D CLOSED-LOOP CONTROL PLUG-IN UNIT, 2 AXES, STANDARD CLOSED- LOOP CONTROL 2, W/O DIRECT MEASURING SYSTEM, MAX. 2 AXES FDD OR 1 AXIS MSD

SITRANS LUT400 Series Ultrasonic level controller: continuous, non-contact, 60 m (197 ft) range. Monitors level, volume, and volume flow in liquids...

SIMODRIVE 611 DIGITAL HIGH PERFORMANCE, 2 AXES CLOSED-LOOP CONTROL PLUG-IN NC SOFTWARE, REQUIRED FROM 06.04.09

SIMODRIVE 611 DIGITAL CONTROL LOOP BLOCK HIGH PERFORMANCE 2 AXES SIN/COS 1 VPP NC SOFTWARE, REQUIRED FROM 06.04.09

MICROMASTER 440 WITHOUT FILTER 3AC 380-480 V +10/-10% 47-63 HZ CONSTANT TORQUE POWER 200 KW OVERLOAD 136% 57 S, 160% 3 S SQUARED TORQUE POWER 250 K...

SIMOTICS S Synchronous servo motor 1FK7 Compact, DC link 300V 0.18Nm, 100K, 6000rpm 0.05kW, Naturally cooled Power/signal connectors Connector can ...

MOBY I communication module ASM454 can be used for operation of Components via PROFIBUS DP-V1 without file handler max. 4 Standard SLG 4x/SLG 7x co...

SINUMERIK 840C/840CE CENTRAL CONTROLLER 1, 12 SLOTS WITHOUT MODULES

SINUMERIK 840C/840CE MMC CPU 486DX4/100 MHZ WITH 8 MB RAM AND FLASHDRIVE

SIMODRIVE 611 DIGITAL CONTROL LOOP BLOCK HIGH PERFORMANCE 1 AXIS SIN/COS 1 VPP DIRECT MEASURING SYSTEM NC SOFTWARE, REQUIRED FROM 06.04.09

SIMODRIVE 611-D Control Unit 1-axis for digital drive, FS + RS, without direct measuring system, performance control

SIMODRIVE 611-A PLUG-IN CLOSED-LOOP CONTROL UNIT, 2-AXES, FOR FEED DRIVES WITH 1FT5, STANDARD INTERFACE

SIMODRIVE 611 SURGE ARRESTER FOR POWER SUPPLY 10 KW, FOR INTERNAL AND EXTERNAL COOLING

SINUMERIK 840DE NCU 571.4 WITHOUT SYSTEM SOFTWARE MEMORY: NC 0.5 MB, PLC 96 KB PREPARED FOR PROFIBUS DP

SINUMERIK 840DE NCU 571.3 WITHOUT SYSTEM SOFTWARE MEMORY: NC 0.5 MB, PLC 96 KB PREPARED FOR PROFIBUS-DP

SINUMERIK OPERATOR PANEL TCU (THIN CLIENT UNIT) FOR SINUMERIK/SIMOTION

SINUMERIK 840C/ 840CE MACHINE CONTROL PANEL T W/O KEYBOARD INTERFACE

SINUMERIK HARD DISK 10 GB WITH SUPPORTING SHEET STEEL AND DAMPER FOR PCU 50/70 WITH 333/500/566/1200 MHZ

SINUMERIK expansion panel 19" for MCP/MPP Mounting using tensioners Customer-specifically equipped based on 6FC5247-0AA43-1AA0

SINUMERIK 840D/DE NCU BOX FOR INSTALLATION OF NCU 561.2/561.3/561.4/ 571/571.2/571.3/571.4/ 572/572.2/572.3/573.4/ 573.2/573.3/573.4/573.5 WITH POW...

SINUMERIK 840D/DE NCU BOX FOR INSTALLATION OF NCU 571/571.2/572/572.2/573, WITH POWER SUPPLY UNIT; BATTERY AND FAN

SINUMERIK FM-NC/810D/DE/840D/DE SLIMLINE OPERATOR PANEL OP 031 19" OP W. 26 CM/10.4" COLOR FLATSCREEN, STANDARD LAYOUT

SINUMERIK 840C/840CE MIXED I/O MODULE 16 INPUTS/16 OUTPUTS 0.4 A 4 ANALOG OUTPUTS +/-10 V

MICROMASTER 411 without filter 380-480 V 3 AC +10/-10 47-63 Hz Constant torque 0.75 kW Overload 150 for 60s Square-law torque 0.75 kW 135x 222x 154...

MICROMASTER 4 BRAKING RESISTOR 200-240 V 39R 4500 W PK 250 W CONT 285 X 185 X 150 MM H X W X D IP20

MICROMASTER 411 built-in Class B filter 380-480 V 3 AC +10/-10 47-63 Hz Constant torque 0.55 kW Overload 150 for 60s Square-law torque 0.55 kW 135x...

LOGO! 230RC,LOGIC MODULE,DISPL. PU/I/O: 230V/230V/RELAY, 8 DI/4 DO; MEMORY 56 BLOCKS, EXPANDABLE WITH EXTRA MODULES

SINAMICS BRAKING RESISTOR INPUT: 1035 V DC OUTPUT: 250 KW/15 S 4.9 OHM

SINAMICS V20 BOP interface Size: 49x56x23 (WxHxD)

SINAMICS V20 BOP Size: 76x85x30 (WxHxD)

Simatic ET 200SP, BASEUnit BU15-P16+A0+2D, BU-TYPE A0, PUSH-IN TERMINALS, W/O AUX-TERMINALS, NEW LOADGROUP, WXH: 15MMX117MM

SIMATIC S7-300, Front connector for signal modules with screw contacts, 20-pole

Power cable pre-assembled 4x 2.5, for motor S-1FL6 HI 400 V with V70/V90 frame size B and C MOTION-CONNECT 300 No UL for connector on the motor sid...

SITOP power DC-USV Module 15 Uninterrupted Power supply with charger for 24 V lead rechargeable battery Input 24 V DC/16 A Output 24 V DC/15 A

Power cable pre-assembled 4x 2.5, for motor S-1FL6 HI 400 V with V70/V90 frame size B and C MOTION-CONNECT 300 No UL for connector on the motor sid...

SIMATIC S5, Memory module 375 EEPROM, 8 KB

SITOP power DC-USV Module 15 Uninterrupted Power supply with charger for 24 V lead rechargeable battery with RS234 interface Input 24 V DC/16 A Out...

TRANSFORMER SITAS; PHASES:1; PN/PN(S6)(KVA):1,6 /7,3; UPRI(V):440+/-5%; USEC(V):230; ISEC(A):6,96; F(HZ):50...60; VECTOR GR./SHIELD WNG.:II0 /0; TA...

SIMATIC WinCC Advanced V15.1, Upgrade V11..V14 -> V15.1 or V11..V14 Combo-> V15.1 Combo; Engineering software in TIA Portal; Floating License...

SIMATIC WinCC Advanced V15.1, Upgrade WinCC flexible 2008 Advanced-> WinCC Advanced V15.1 Combo; Engineering software in TIA Portal; Floating Li...

SIMATIC WinCC Professional 512 PowerTags V15.1, Upgrade V11..V14 -> V15.1 or V11..V14 Combo-> V15.1 Combo; Engineering software in TIA Portal...

residual current device RCD820 advanced RCD type A load side mounted rated resid. current 0.03...30A at 50/60Hz adjustable tv 0...10000ms 4-pole In...