Siemens

Simatic WinCC Advanced V14, Upgrade V11..V13 -> V14 or V11..V13 Combo -> V14 Combo; engineering software in TIA Portal; floating license; sof...

SIMATIC S7-400, Power supply PS407, 20 A, wide range, UC 120/230V, 5 V DC/20 A

SIMOTICS S-1FL6-1FL6 Operating voltage 3AC 400 V Pn=2.5 kW; Nn=2000 rpm M0=15 Nm; MN=11.9 Nm Shaft height 90 mm, with angle plug; incremental encod...

Scalance XF204-2, FLAT, Managed IE Switch, 4 X 10/100MBIT/S RJ45 PORTS, 2 X 100MBIT/S FO PORTS, FAULT SIGNAL CONTACT with SET- Button, REDUNDANT PO...

Communication module CM 1542-1 for connection of S7-1500 to PROFINET as IO controller: TCP/IP, ISO-on-TCP, UDP, S7 communication, IP broadcast Mult...

SENTRON, measuring device, 7KM PAC4200, LCD, L-L: 690 V, L-N: 400 V, 5 A, 3-phase, Modbus TCP, optional Modbus RTU / PROFINET / PROFIBUS / DI/DO, a...

CLOSED-LOOP AND OPEN-LOOP CONTROL MODULE VECTOR CONTROL, CUVC SIMOVERT MASTERDRIVES FIRMWARE VERSION: V3.4

Sinamics V20 3AC380-480V -15/+10% 47-63HZ RATED POWER 15KW with 150% OVERLOAD FOR 60SEC UNFILTERED I/O-INTERFACE: 4DI, 2DO,2AI,1AO FIELDBUS: USS/ M...

Sinamics S120 CONVERTER POWER Module PM340 INPUT: 3AC 380-480V, 50/60HZ OUTPUT: 3AC 5,9A (2,2KW) FRAME SIZE: BLOCKSIZE SIZE FSB with Integrated LIN...

Sinamics S120 TERMINAL Module CABINET TM54F WITHOUT DRIVE-CLIQ CABLE ADD ON BOARD FOR Sinamics CONVERTORS with FAIL-SAFE IN- and OUTPUTS

SIMOVERT Master drives Motion Control Communication module SIMOLINK SLB Delivery without connector und operating instructions

SINAMICS G120D Power Module PM250D with integrated Class A filter capable of energy recovery. 380-480 V 3 AC+10/-10% 47-63Hz Power high overload: 3...

Sinamics TERMINAL Module TM31 ADD ON BOARD FOR Sinamics with Digital and ANALOG IN- and OUTPUTS IP20 FOR CAP RAIL MOUNTING

Scalance X208PRO, Managed IE Switch, 8 X 10/100MBIT/S M12-PORTS, IP65/67, LED-DIAGNOSTICS, FAULT SIGNAL CONTACT, REDUNDANT POWER SUPPLY, PROFINET- ...

Sinamics G120C RATED POWER 1,1KW with 150% OVERLOAD FOR 3 SEC 3AC380-480V +10/-20% 47-63HZ Integrated FILTER Class A I/O-INTERFACE: 6DI, 2DO,1AI,1A...

SIPLUS HCS4200 POM4220 Highend. Power Output Module (POM) to insert in HCS RACK4200. With 8 power outputs 5540 W at 277V and 9600 W at 480V (with c...

circuit breaker 3VA2 IEC frame 250 breaking capacity class M Icu=55kA @ 415V 3-pole, line protection ETU320, LI, In=250A overload protection Ir=100...

SIMOTICS S-1FK2 HD Servo motor M0=2.4 Nm; PN = 1.07 kW at nN=6000 rpm (380-480 V); PN = 0.75 kW At nN=3000 rpm (200-240 V); With holding brake; Deg...

SIMATIC S7-300, CP 341 Communications processor with RS232C interface (RS-232-C) incl. configuration package on CD

SIMATIC NET, CP 342-2 COMMUNICATIONS PROCESSOR FOR CONNECTION OF SIMATIC S7-300 TO AS-INTERFACE (W/O FRONT CONNECTOR)

SIMATIC S7-400, Power supply PS407, 20 A,UC 120/230V,5 V DC/20 A

SIMATIC S7-400H, rack UR2-H, central and distributed with 2 x 9 slots

SIMATIC S7-1500, CM PTP RS422/485 HF Communication module for Serial connection RS422 and RS485, Freeport, 3964 (R), USS, MODBUS RTU Master, Slave,...

IWLAN client, SCALANCE W748-1 M12, 1 radio, 3 N-CON antenna port, iFeatures support via key plug, IEEE 802.11a/b/g/h/n, 2.4/5GHz, gross 450 Mbit/s ...

SIMODRIVE 611 POWER MODULE, 1 AXIS, 8 A, INTERNAL COOLING, MOTOR RATED CURRENT: 1FT5 = 4A, 1FT6 = 3A INDUCTION MOTOR = 3 A

SIMATIC S7-400, Power supply PS407; 10 A, wide range, UC 120/230V, 5 V DC/10 A, for redundant use

SIMATIC S7-400, rack UR1, central and distributed with 18 slots, 2 redundant PS can be plugged in

IWLAN Access Point, Scalance W774-1 RJ45, 1 radio, 2 R-SMA antenna connector, iFeatures support via KEY-PLUG, IEEE 802.11a/b/g/h/n, 2,4/5GHz, Brutt...

SIMODRIVE 611 DIGITAL HIGH PERFORMANCE, DIRECT MEAS. SYSTEM 1 AXIS CLOSED-LOOP CONTROL PLUG-IN NC SOFTWARE, REQUIRED FROM 06.04.09

SIMOTICS S-1FL6-1FL6 Operating voltage 3AC 400 V Pn=1 kW; Nn=2000 rpm M0=6 Nm; MN=4.78 Nm Shaft height 65 mm, with angle plug; absolute encoder 20-...

Simatic S7-400, POWER SUPPLY PS 405: 10A, WIDE RANGE, 24/48/60V DC, DC, 5V DC/10A, FOR REDUNDANT USE ATEX APPROBATIONIDENTIFICATION

Sinamics S120 CONVERTER POWER Module PM340 INPUT 3AC 380-480V, 50 60HZ OUTPUT 3AC 5,9A (2,2KW) FRAME SIZE BLOCKSIZE SIZE FSB INTERNAL AIR COOLING

SINAMICS V20 380-480 V 3AC -15%/+10% 47-6 Rated power 11 kW with 150% overload for 60 sec. Integrated filter C3 I/O interface: 4 DI, 2 DQ, 2 AI, 1 ...

TRANSFORMER SITAS; PHASES:1; PN/PN(S6)(KVA):2 /9,7; UPRI(V):550-525-500-480-460- 440-415-400-380-230-208; USEC(V):2X115; ISEC(A):2X8,7; F(HZ):50......

Communication module LOGO! communication module EIB as interface between EIB and LOGO! PS 24 V DC/AC Image via bus v. max.: 16 DI, 12 DO, 8 AI and ...

SIMOVERT Master drives Control and Control module CU1 Software Version 1.1

SIMATIC S7-400, Power supply PS407;10A,UC 120/230V,5 V DC/10 A for redundant use

Sinamics G120C RATED POWER 2,2KW with 150% OVERLOAD FOR 3 SEC 3AC380-480V +10/-20% 47-63HZ Integrated FILTER Class A I/O-INTERFACE: 6DI, 2DO,1AI,1A...

Communications processor CP 342-5 for connection of SIMATIC S7-300 to PROFIBUS DP, S5-compatible, PG/OP and S7 communication

Simatic DP, DISTRIBUTED I/O PN/PN COUPLER COUPLING Module FOR CONNECTING TWO PROFINET NETWORKS TRANSFER OF PROFISAFE DATA REDUNDANT POWERSUPPLY

SINAMICS S210 Input voltage: 3AC 200-480V -10%/+10% 2.9A 45-66Hz Output voltage: 0-Input V 2.3A 0-550Hz Motor: 0.75kW Protection: IP20 Frame Size A...

SINAMICS S210 Input voltage: 200-240 V 1AC; -10%/+10%; 9.3 A; 45-66 Hz; Output voltage: 0-input V; 4.4 A; 0-550 Hz; Motor: 0.75 kW; Degree of prote...

MICROMASTER 420 UNFILTERED 1/3AC 200-240V +10/-10% 47-63HZ CONSTANT TORQUE POWER 2.2 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 2.2 KW 202 X 14...

SIMATIC S7, RS485 REPEATER FOR THE CONNECTION OF PROFIBUS/MPI BUS SYSTEMS WITH MAX. 31 NODES; MAX. 12 MBIT/S, IP20

SIMATIC NET, CP 443-5 BASIC COMMUNICATIONS PROCESSOR FOR CONNECTING SIMATIC S7-400 TO PROFIBUS, FMS, S5-COMPATIBLE PG/OP AND S7 COMMUNICATION

SIMATIC S7, RAM Memory Card for S7-400, long design, 2 Mbyte

SIMOTICS S-1FL6 Operating voltage 230 V 3 AC PN=1 kW; NN=3000 rpm M0=3.18 Nm; MN=3.18 Nm Shaft height 40 mm Encoder absolute 20-bit (12-bit multi-t...

SCALANCE X104-2, Unmanaged IE switch, 4x 10/100 Mbit/s RJ45 ports, 2x 100 Mbit/s Multimode BFOC, LED diagnostics, error-signaling contact with set ...